MODELS:
WTF :- Suitable for Direct On Line Starter & Fully Automatic Star Delta Starter
WDS :- Suitable for Semi Automatic Star Delta Starter (SASD)
WTS :- Suitable for SASD with double time delay (Special for BENTAX SASD Starter
JSA :- Suitable for Single Phase Auto Starter

FEATURES :
To prevent Dry Running (optional)
Single Phasing Preventer provided
Over Load Protection provided (optional)
Can be used for any HP Motor
Auto Start on healthy supply

MODELS:
ACS-1&3 :- Suitable for Single Phase & Three Phase Supply for auto stop of generator set on resumption of main supply.
ACS-3S :- Suitable for Three Phase generator set.

FEATURES :
Automatically turn off the generator on the power rasumption.
Restricts unnecessary fuel consumption that save money.
Generator ON & Power Supply indicator facility.
Available in Single Phase & Three Phase Models.

MODELS:
ALC-1 :- Suitable for Single Phase Lighting Load up to 25 amp.
ALC-3 :- Suitable for Three Phase Lighting Load up to 25 amp.
ALC-3(p) :- Suitable for Control Panel Mounting.

FEATURES :
Can be set on desireable light intensity.
Auto/manual facility in all models.
Generally used at street lights, airport, railway stations, industries & Housing colonies.
Good light sensitive component is provided.

MODELS:
LLC-1 :- Suitable for Single Phase Monoblock & Jet Pump.
LLC-1/S :- Suitable for Single Phase Submersible Pump Panel board up to 25amp load.
LLC-3 :- Suitable for any HP DOL, FASD & SASD.
LLC-3/S :- Suitable for Direct Three Phase Motor with Single Phasing Protection.

FEATURES :
Useful for overhead/underground tanks to restrict over flow of water
Dry Running of water pump which saves water & energy.
Due to fully automatic function, no manpower requires.
Indicator facility available for Motor ON , different waterlevel of both tanks.
Single Phasing Prevention is provided. (optional)
Special developed Anti-Corrosive Sensors for conductive & non- conductive materials. (Magnetic Sensor, SS Sensor)
Automatic Off & ByPass facility provided.

MODELS:
PCM-3:- Suitable for Three Phase Lighting Load with Over Load & Short Circuit Protection.

FEATURES :
Capable to shift and re-shift the load from one phase to another phase automatically
when load increases on any phase.
No manual work required.
Over Load & Short Circuit Protection is provided through MCB.
Healthy Phase Indicator facility
Facility of Cut-off to avoid fluctuation of low voltage.
Inbuilt heavy duty relay to avoid short circuit

MODELS:
JDW :- Suitable for TV, TV+VCR, FREEZE, AC (wall mounting type).
JDM :- Suitable for TV, TV+VCR, FREEZE, AC, COMPUTER, WATER –
COOLER,UPTO 3 HP MOTOR (table top type).

FEATURES :
Various input voltage range from 100V to 300V.
Available in various capacity from 0.2KVA to 10KVA.
Protection against high/low voltage.
Less iron losses provides higher efficiency.
Built in on time delay for compressor attached appliances use.
Accurate monitoring of output voltage condition
Easy installable models like wall mounting & table top models.
Specially designed for motors at low voltage operation.

MODELS:
MPR :- Suitable for Single Phasing Prevention & Over Load Protection
PUMPRO :- Suitable for Single Phasing Prevention, Over Load Protection & Dry Run Protection

FEATURES :
Available for Single Phase & Three Phase Supply
Protect Motor from Over Load
Protection against Dry Running
Protection against high/low cut off voltage (optional)
Protection of reverse phase sequence

OPERATION DETAILS

? AUTOMATIC OPERATION
• Connect the Dual AC Timer as per the connection diagram given as above
• As per application and requirement of Air Conditioning first set the TIME SETTING SWITCH for 1(one) hour delay time to 9(nine) hour delay time
• After completion the connection, switch on supply of DAT, it takes 1 minute for starting AC1.
• After 10 second AC2 will work as per the time delay (hour) setting in TIME SETTING SWITCH.
• During the automatic operation TIME SETTING SWITCH is changed than both AC’s are switched off and DAT is reset and start the AC-1 and AC-2 as per the new program

? MANUAL OPERATION
• For Manual Operation set “0” at TIME SETTING SWITCH
• At the front of DAT press AC-1 Push Button for start the AC-1, & same Push button is used for switch off the AC-1
• At the front of DAT press AC-2 Push Button for start the AC-2, & same Push button is used for switch off the AC-2

? SAFTEY & CONTROLS
• Both AC’s do not start with to gether, by means AC-1 & AC-2 will work as per the delay TIME SETTING SWITCH and by default it works as per the program .
• If Main input supply is failed and it restart than DAT will work after 1 min delay time as per the by default delay time and again it runs as per the TIME SETTING SWITCH   program.

MODELS:
ELCB+MCB :- Suitable for giving Earth Leakage & Short Circuit Protection
ELCB+RO :- Suitable for giving Earth Leakage & High/Low Cut-off Protection
ELCB+RO+MCB :- Suitable for giving Earth Leakage, High/Low Cut-off ,& Short Circuit Protection.

FEATURES :
Save life from dangerous Electrical Shock
Over Load & Short Circuit Protection (optional).
High Voltage Cut-off.
Tripping time setting less than 30milli sec.
Extra Siren facility on tripping for two minutes.
Variable adjustment of leakage current from 5mA to 50mA.
Emergency By-Pass facility.

MODELS:
EPT :- Suitable for Star Delta Control Panels & Industrial purpose

FEATURES :
Time setting accuracy &repeat efficiency 1%
Indicator facility for time delay & supply voltage
Adjustable time delay setting 10% to100%
Available for Single Phase & Three Phase Supply

MODELS:
JSG :-Suitable to give excellent safety to compressor attached appliances
HVC-25 :- Suitable to give excellent voltage protection to any appliance.

FEATURES :
Protection against high/low cut off voltage
Sufficient ON Time Delay provided for Compressor to start with low pressure.
Available at variable amp. Range
Indicator facility available.
To check voltage Volt Meter attached (optional)

MODELS:
SVC-1 :- For Single Phase Supply
SVC-3 :- For Single Phase Supply

FEATURES :
Accurate Voltage Correction due to Electromechanical device.
Protection against high/low cut off voltage
Available in Single Phase & Three Phase Supply (balanced & unbalanced)
0.5KVA to25KVA, 5KVA to 100KVA respectively.
Correction rate of 35V/Sec.
Approximately Efficiency 99%.

MODELS:
ELOW :-Suitable for giving protection through Electronic Over load relay.
ELCW ;- Suitable for giving protection through Electronic Contactor& Over load relay.
ELM :- Suitable for giving over load protection through MCB

FEATURES :
Protection against Over Load
Dry Run protection is provided with heavy duty contactor relay (optional).
Auto start facility available (optional).
Inbuilt Voltmeter & Amp. meter.
Protection against high/low voltage.
MCB provided (optional).
Provided long life Starting & Running Capacitor.

MODELS:
SPP (Mini) :- Suitable for all types of Panel Boards
SPP-A :- SPP with adjustable unbalance voltage
NSV-H/L :- SPP with high/low cut off & By Pass facility

FEATURES :
Protection for any HP Motor against Single Phasing &Unbalance supply
Protection of reverse phase sequence
To avoid unnecessary tripping, time delay of 4 to7 sec. Provided.
Protection against high/low cut off voltage (optional)
Protection against Dry Running (optional)

MODELS:
JSC :- Suitable for Single Phase Motors
JTC :- Suitable for Three Phase Motors

FEATURES :
Protect Motor from Over Load
Protection against Dry Running (optional)
Protection against high/low cut off voltage
Auto Restart with On Time Delay (optional)
Available in Variable Current Range.
Single Phasing Preventer Provided (optional)

MODELS:
WLG-1 :-Water Level Guard for Single Phase Supply
WLG-3 :- Water Level Guard for Three Phase Supply
SWG :- Water Level Guard with SPP for Three Phase Supply

FEATURES :
Provide automatic water level Protection for one level
Protection against Dry Running
Water Level Indication YES/NO provided
Sensing Element of Stainless Steel are provided
Tripping time delay 4 to 7 sec.